FixCode Guide
Home › Samsung › Samsung Oven & Range

Samsung Oven & Range Error Codes & Fix Guides

Samsung Oven & Range display showing CODE LIST — FixCode Guide error code graphic

All FixCode Guide coverage for Samsung oven & range error codes: start with the complete code list, or jump to a deep-dive guide for a specific code. Everything is verified against Samsung manufacturer documentation.

Guides in this section

Samsung Oven & Range Error Codes List: Every Code Explained

Most searched Samsung oven & range codes

CodeMeaning
APAccess Point mode — not an error. AP means the oven's Wi-Fi is in pairing/setup mode, waiting to be connected to the SmartThings app.
Bad Line'Bad Line' on a Samsung oven display = power line/supply problem — the oven is detecting incorrect or unstable incoming power (not a cooking fault).
C-21Oven temperature sensor fault — the sensor circuit is reporting implausible values (C-2x family member).
C-24Oven temperature sensor fault family — C-24 is associated with the oven sensor circuit reading out of range on the high side (sensor resistance abnormal).
C-A2Cooling-fan / panel-cooling error on Samsung ovens (C-A family covers the control-cooling system).
C-F0No signal / communication fault — the control is not receiving the expected signal (Samsung C-F family: key input / board communication).
C-F2Communication error between the main control board and the touch panel (C-F family on Samsung ovens).
C-d0Stuck/shorted key signal on Samsung ovens without a keypad membrane fault being isolated (C-d0 = a button seen as continuously pressed).
C-d1Door lock/door switch fault on Samsung ovens — the control cannot confirm the door lock state (self-clean lock circuit).
E08Low-frequency/rarely documented Samsung oven code — not part of Samsung's core published oven code list; treat as a platform-specific fault and diagnose by symptom with the model's tech sheet.
OENot a standard Samsung oven fault code — OE is a washer/dishwasher-family code (drain/overflow); on an oven it most likely indicates a mis-read display or a model-specific rendering that needs the model's own code table.
SEKeypad short / touch panel error — a shorted key or faulty touch membrane on the oven control.